What is the cage of the bearing?
As an important component of the bearing, the cage has a very large use effect. During the bearing use, the cage often appears damaged, which will seriously affect the use effect of the bearing, and even cause the bearing to be completely damaged and unusable. According to our understanding, Eric Bearing Limited will share some common damages related to TIMKEN bearing cages.
Common damages to TIMKEN bearing cages include:
1. The cage damage includes cage deformation, breakage and wear:
2. Breakdown of the column:
3. Deformation of the end face:
4. Wear of concave surface:
5. Wear of guide surface:
Common causes of damage to TIMKEN bearing cage are:
1. Poor installation (non-linearity of the bearing).
2. Poor use.
3. Large moment load.
4. Large shock and vibration.
5. If the speed is too high, it accelerates and decelerates rapidly.
6. Poor lubrication.
7. The temperature rises.
Common measures for TIMKEN bearing cage damage:
1. Check the installation method.
2. Check the load, rotation and temperature conditions.
3. Reduce vibration.
4. Correct the selection of the cage.
5. Change the selection method of lubricants and lubrication. TIMKEN HM804840 bearings online, pls click here :
TIMKEN bearing cage types and uses
The main purpose of the TIMKEN bearing cage is to separate the rolling elements to reduce the frictional heat generated by the bearing and to evenly separate the rolling elements to optimize the load distribution. The rolling elements are guided in the unloaded area of the bearing. For separate bearings, the rolling elements can be kept as one body when installing or removing one of the bearing rings.
The cage centered on the rolling elements allows lubricant to easily enter the TIMKEN bearing. The cage centered on the ring brings higher guidance accuracy, and is usually used for bearings that must withstand the high speed, high vibration or inertial force generated during the overall movement of the bearing.
The main cage types are:
1. Stamped metal cage
The stamped metal cage (steel or brass sheet) is lightweight and can withstand high temperatures.
2. Machined metal cage
The machined metal cage is made of brass, steel or light alloy. It can withstand high speed, high temperature, high acceleration and high vibration.
3. Polymer cage
The polymer cage is made of polyamide 66 (PA66), polyamide 46 (PA46), polyether ether ketone (PEEK) or other polymer materials. The good sliding properties of the polymer material cage produce almost no friction, so it can allow high speed. In the case of poor lubrication, these cages can reduce the risk of sudden failure and failure side effects, because they can work for a period of time under limited lubrication conditions.
4. Pillar type cage
The steel pillar-type cage is a roller with perforated pins and is only used for large-size roller bearings. This kind of cage is relatively light and can accommodate a large number of rollers.
Eric Bearing Limited, Your trustworthy bearing supplier, providing Variety Top Brand Bearings. As a leading bearing distributor in Asia, ERIC BEARING LIMITED has high visibility in our customers, with our products being exported to over 100 countries. We have more than 8 years of export experience that can help you find the ideal purchasing solution. If you are looking for Timken bearings or have any questions about bearings, please feel free to contact us.
Hot Tags: